Safety Notes

24
Description of Device
en
Indication screen Fig. 5-4 "Indication screen overview" depicts the 6 areas with display and control
elements.
The indication screen is divided into the following 6 areas:
1. Header: Depicts the indication type. For arthroscopic procedures, the joint
type is depicted in the upper right. For hysteroscopies, a connected scale is de-
picted.
2. Suction level (only PG145): Used to select one of two available suction pump
levels. The respective suction level is depicted in blue.
3. Footer: Only control elements are depicted here: Function fields and symbols.
4. Status line: Depicts messages, warnings, and error messages.
5. Nominal values: Set the nominal pressure on the left and the nominal flow on
the right side (not for laparoscopy!).
6. Actual values: Indicates the measured actual pressure on the left side. In Hys-
teroscopy, the right side depicts the pumped volume or the difference vol-
ume if a scale is connected.
The 4 specific indication screens are described in details in the following Chap-
ters:
8.3 "Screen Displays of the Laparoscopy Indication"
9.5.1 "Screen Displays of the Arthroscopy Indication"
10.3 "Screen Displays of the Hysteroscopy Indication"
11.3 "Screen Displays of the Urology Indication"
Fig. 5-4 Indication screen overview
(1) Header
(2) Suction level (only PG145)
(3) Footer
(4) Status line
(5) Nominal values
(6) Actual values
ARTHRO
SET
PRESSURE
45 mmHg
SET
FLOW
1.5 l/min
ACTUAL PRESSURE
0 50 100 150 200
START
Start pump
Knee
0
2
(1)
(4)
(2)
(3)
(5)
(6)
OBJ_DOKU-0000006143-008.fm Seite 24 Mittwoch, 11. November 2020 2:29 14