Installation of Electronics Manual

Installation of signal con.
FlexCOR™ Model CMF Series 42
Fluid Components Intl
Document 06EN003327 Rev. -
5.2.11 Compact (Integral)
Ex-d version
Location of the
SENSORPROM
®
memory unit
The SENSORPROM
®
unit is normally factory-installed. To remove the
SENSORPROM
®
unit, use the following procedure:
1. Remove the rear cover, by loosening the safety tap allen screw (M3), and turn the rear cover
counter-clockwise.
2. Remove the electronics using the holes provided.
The SENSORPROM
®
unit is placed at
the bottom of the housing.
The SENSORPROM
®
unit can be
installed/removed by screwing/
unscrewing the 6 terminal screws
connecting the SENSORPROM
®
unit.
The label on the SENSORPROM
®
unit
must face outwards.