Setup and Menus User Manual

Commissioning
Fluid Components Intl
Document 06EN003327 Rev. -
57 FlexCOR
™ Model CMF Series
Menu detail
Digital output
Frequency
7.5.1 Outputs setting
menu
Current output
The current output should be set to off when not used, otherwise an error will be pending if the meter
detects an open loop.
The digital output menu can be used for generating a frequency proportional output signal, for
pulse signal (totalizing), indicating error level/number, limit or flow direction or as batch output. Only
one function can be implemented for each output section.
Digital output
Pulse