Instructions / Assembly
F. Resultant Damages
We cannot be responsible for damages to the product if the product is not used in accordance
with the instructions provided.
G. Technical Data and Specifications
The recommended filter run time is twice a day for 4 to 5 hours; regular backwashing time
is 2-3 minutes at least once a week, and floor vacuum cleaning as needed are the basic
pump requirement for maintaining clean swimming pool water!
The major components for this model are: (Confirm you have all these components before
starting installation)
The Tank lid with 7-way valve, filter pump, filter tank, 1 1/4’’-1 1/2’’ hose connectors
and base plate.
H. Unpacking your filter system
Carefully remove the product and all component parts from the box. Cross reference all parts in
the box with the parts list reference chart to make certain all parts are present before beginning
assembly.
NOTE: Some parts may be located within the filter tank. To access these parts, you must remove
the tank cover.
Refer to *page 11-16 for complete EXPLODED VIEW PARTS DIAGRAMS.
I. Power source instructions
1. The Above Ground filter pump system you have purchased is equipped with a standard
electrical cord and plug which should only be connected to a power outlet protected by a 30
Amp Ground-Fault-Circuit-Interrupter (GFCI) that has been installed by a professional
electrician and adheres to local codes and regulations.
2. To avoid electric shock, power cord extensions should not be used.
J. Positioning your filter system
For the operation of this filter system with Above Ground pools, you need a skimmer
installed in your pool. Either an integrated skimmer (built into the pool wall) or a suspended
skimmer (attachment to the pool wall).
The installation area must allow an adequate safety margin to the pool wall.
We recommend putting the filter system on a concrete slab or similar. Be sure the
installation is level.
Additional installation accessories such as hoses, hoses clamps, and filter sand
(not included) are available from your pool dealer.
Page 4
Flow rate
MAX Operating Pressure
Rated Voltage
Power
Amount of Sand
Pool size
NE4487
2100 GPH
22 psi
110V AC 60Hz 110V AC 60Hz 110V AC 60Hz
1/2HP
Max 35lbs
Max 4,000 US gallons Max 8,000 US gallons Max 20,000 US gallons
NE4488
2300 GPH
22 psi
3/4 HP
Max 75lbs
NE4489
5400 GPH
22 psi
1 HP
Max 100lbs