Instructions / Assembly

specifications for the pH- and chlorine value). It is equipped with a tank drainage system. The
filter tank comes ready to attach with an approved filter pump with hair and lint basket, and a
plastic base for ready on- site mounting.
Read this manual carefully before installation. The filtration system and pump must be installed
in accordance with all federal and local codes and standards in effect for the area of installation.
We decline all responsibility for the consequences of failure to comply with the installation
instructions. We recommend that you comply with the power source instructions to avoid over-
loading the pump motor and/or electric shock.
This filtration system is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge.
Safety notes and information boxes should always be observed.
C. Safety Notes
Your filter pump was constructed and tested and left the manufacturing plant in technically oper-
ational condition. In order to maintain this condition and ensure safe operation, the user should
observe the notes and product information contained in this technical manual. If there is any
indication that safe operation is no longer possible, the device is to be disconnected from the
power supply and secured against accidental use.
This is the case when:
The device has visible damage.
The device no longer appears functional.
After long periods of storage in poor conditions.
If the power cord or other parts of this equipment are damaged, they have to be replaced by
manufacturer or its service agent or a similarly qualified person in order to avoid danger.
D. Damage during delivery
Your filter system has been carefully and professionally packed for delivery. Please check to
ensure that the package is undamaged and that all parts are in the box. If you purchased this
product on order and the product was shipped to you, ensure that delivery is complete. Damage
to product as a result of shipping is not the responsibility of the supplier and must be immediately
reported to the shipper. The shipper assumes the liability for damages during delivery, the
supplier is not responsible for it.
E. Implied Warranty
The manufacturer warranties safe operation and reliability only under the following conditions:
The filter system is installed and operated according to the assembly and operating
instructions.
Only original replacement parts are used for repairs or replacements (consumable &
expendable parts do no fall under the warranty).
Expendable parts that do not fall under the warranty include:
All O-rings
Pressure gauge
Mechanical seal, complete
Hoses and metal hose clamps









Page 3