Instructions / Assembly

4. Motor bearings noisy from normal wear, rust, overheating, or concentration of chemi cals causing seal damage
which will allow chlorin ated water to seep into bearings wiping out the grease causing bearing to whine.
Solution: All seal leaks should be replaced at once.
page 12
TECHNICAL DATA
B.W.No. HTA/HTI HP Voltage Hertz Amps Flow Rate
NE4517 HTI100 1.0 115/230 60 13/6.5 86GPM
NE4518 HTI150 1.5 115/230 60 15/7.5 90GPM
NE4519 HTI2SP075 0.75/0.23 230 60 / .6 80/35GPM
NE4520 HTI2SP100 1.0/0.3 230 60
1
6
/
1
.
8
8
6/38GPM
NE4521 HTI2SP150 1.5/0.39 230 60 7.5/2.1 90/42GPM
NE4522 HTI2SP200 2.0/0.4 230 60 11/2.4 92/44GPM
NE4513 HTA075 0.75 115 60 9.2 84GPM
NE4514 HTA100 1.0 115 60 12 88GPM
NE4515 HTA2SP075 0.75/0.28 115 60 10/3.2 84/37GPM
NE4516 HTA2SP100 1.0/0.3 115 60 11/3.4 88/40GPM
NEP4208 HTA2SP150 1.5/0.39 230 60 7.5/2.1 90/42GPM
5