User Manual

1
CONGRATULATIONS!
YOU HAVE PURCHASED A HIGH QUALITY REPLACEMENT PUMP FROM
BLUE WAVE. ALL PUMPS COVERED IN THIS MANUAL HAVE FULL
RATED MOTORS AND HAVE BEEN MANUFACTURED AND TESTED TO
OFFER MANY YEARS OF TROUBLE FREE SERVICE.
IMPORTANT – READ THIS MANUAL CAREFULLY
NOTE – To prevent potential injury and to avoid unnecessary service calls, read this manual carefully and completely.
SAVE THIS INSTRUCTION MANUAL
Use of unauthorized replacement parts voids warranty.
ATTENTION INSTALLER – THIS MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE
INSTALLATION, OPERATION, AND SAFE USE OF THIS PUMP THAT MUST BE FURNISHED TO THE
END USER OF THIS PRODUCT. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY.
THIS MANUAL IS BROKEN INTO SEVERAL SECTIONS:
1. Safety Instructions & Warnings
2. General Installation Instructions
3. Electrical & Wiring Instructions
4. Start-Up & Operation
5. Maintenance, Storage & Winterization
6. Shaft Seal Chang Instructions
7. Technical Data for FlowXtreme 48SM-I&48SM-II Pumps
8. Part List & Diagram for FlowXtreme 48SM-1&48SM-II Pumps
9. Trouble Shooting – FAQs
10. Warranty information
Section #1, Safety Instructions
WARNING – To reduce risk of injury, do not permit children to use or climb on this product. Closely supervise
children at all times. Components such as the filtration system, pumps, and heaters must be positioned to prevent children
from using them as a means of access to the pool.
CAUTION – This pump is intended for use on permanently installed In Ground or Above Ground swimming pools