Manualshelf

Full Product Manual

ManualsBrandsFlowXtreme ManualsOutdoorsSand Filter System for Above Ground Pools 1 HP with Multiport Valve, 16 in. 100 lb. 5,400 GPH, 50 ft. Max Head
12345678910
3
Only original replacement parts are used for repairs or replacements (consumable & expendable parts do no
fall under the warranty).
Expendable parts that do not fall under the warranty include:
All O-rings
Pressure gauge
Mechanical seal, complete
Hoses and metal hose clamps
F. Resultant Damages
We cannot be responsible for damages to the product if the product is not used in accordance with the instructions
provided.
G. Technical Data and Specifications
The recommended filter run time is twice a day for 4 to 5 hours; regular backwashing time is 2-3 minutes at
least once a week, and floor vacuum cleaning as needed are the basic pump requirement for maintaining
clean swimming pool water!
The major components for this model are: (Confirm you have all these components before starting
installation)
The Tank lid with 7-way valve, filter pump, filter tank, 1 1/4’’-1 1/2’’ hose connectors and base plate.
NE4487 NE4488 NE4489
Flow rate: 2100 GPH 2300 GPH 5400 GPH
MAX Operating Pressure: 22 psi 22 psi 22 psi
Related Voltage: 110V AC 60Hz 110V AC 60Hz 110V AC 60Hz
Power 1/2HP 3/4 HP 1 HP
Amount of Sand: Max 35lbs Max 75lbs Max 100lbs
Pool size: Max 4,000 US gallons Max 8,000 US gallons Max 20,000 US gallons
H. Unpacking your filter system
Carefully remove the product and all component parts from the box. Cross reference all parts in the box with the
parts list reference chart to make certain all parts are present before beginning assembly.
NOTE: Some parts may be located within the filter tank. To access these parts, you must remove the tank cover.
Refer to *pages 10-15 for complete EXPLODED VIEW PARTS DIAGRAMS.
I. Power source instructions
1.The Above Ground filter pump system you have purchased is equipped with a standard electrical cord and
plug which should only be connected to a power outlet protected by a 30 Amp
Ground-Fault-Circuit-Interrupter (GFCI) that has been installed by a professional electrician and adheres to
local codes and regulations.
2. To avoid electric shock, power cord extensions should not be used.
J. Positioning your filter system