User guide

30of34 MN300282 RevA
APPENDIX StepEight
Setup:Setup will display setting for all functions of EchoSwitch®.Use this feature to confirm the
configurationofthesensor.
1. InTOP‐LEVELMENU,selectHELP.
2. SelectSETUP.
3. Setupwilllistthefollowingsettings:
a. UNITS, HEIGHT, FILL_H, RELAY1*, RELAY2*,
RELAY3*.
b. *Eachrelaywilllistthefollowingsettings:
i. Relay Function, On Setting, Off Setting,
SafeSettingandDelay
4. SelectEXITtoreturntoTOP‐LEVELMENU.

Reset:Resetenablestheentiresensororspecificrelaystoberesettofactorysettings.
1. InTOP‐LEVELMENU,selectHELP.
2. SelectRESET.
3. SelectRALL,RST1,RST2orRST3.
a. RAll–ResetstheentireEchoSwitch®
b. RST R1 – Resets only the settings associated
withRelay1
c. RST R2 – Resets only the settings associated
withRelay2
d. RST R3 – Resets only the settings associated
withRelay3
4. SelectEXITtoreturntoTOP‐LEVELMENU.
