Owner's manual

27 AUG 08 PRELIMINARY MANUAL 45 of 57
Rev 1_3 Commander LI90 Series
o Horizontal Tanks – Select among Flat Ends or Round Ends.
Length
Diameter
Flat Ends Round Ends
1. Sensor Height 2. Tank Length
3. Tank Diameter 4. End Cap Length
• Sensor Height – This is the distance from the bottom of the tank to the
bottom of the sensor
• Tank Length – This is a length of the tank.
• Tank Diameter – This is diameter of the tank.
• End Cap Length – This is the distance for one of the end caps. You do
not need to configure this setting for the Flat End Tank.
• Use the Next soft key to advance to the next setting
• Use the Back soft key to return to the previous setting