Owner's manual

44 of 57 PRELIMINARY MANUAL 27 AUG 08
Commander LI90 Series Rev 1_3
o Vertical Tanks – Select among Rectangular, Round Bottom or Cone Bottom.
Rectangular Round Bottom Cone Bottom
1. Sensor Height 2. Tank Height
3. Tank Width/Diameter 4. Tank Length/Cone
• Sensor Height – This is the distance from the bottom of the tank to the
bottom of the sensor
• Tank Height – This is a dimension for either the Height of the Tank or
the Height of the Straight Side of the cone bottom tank.
• Tank Width / Diameter – This is either the width of the tank or the
diameter of the tank
• Tank Length / Cone – This is either the length of the tank or the Height
of the Cone. You do not need to configure this setting for the Round
Bottom tank.
• Use the Next soft key to advance to the next setting
• Use the Back soft key to return to the previous setting