Owner's manual

28 of 57 PRELIMINARY MANUAL 27 AUG 08
Commander LI90 Series Rev 1_3
• Follow the sequence above:
• 1. Press Enter to begin
• 2. Press F1 for number 1
• 3. Press F2 for number 2
• 4. Press F3 for number 3
• 5. Press ▼ for “.”
• 6. Press F4 for number 4
• 7. Press Enter to save setting
• The screen cannot change until a value is stored in memory.
o Use the Next soft key to advance to the next setting
o Use the Back soft key to return to the previous setting
o When done, press Exit to leave the Secured Function Section