Instruction Manual

DataView™ LI55 Level Controller Instruction Manual
99 | Page
Display Parameter Action/Setting Description
Cal
Calibrate
Enter the Calibration menu
Calib
Calibrate
Calibrate 4-20 mA output (internal reference
source used for scaling the output)
Contrl
Control
Enter Control menu to turn relays on/off, set
analog output manually, or return meter to
automatic operation
Copy
Copy
Enter copy function
CutofF
Cutoff
Set low-flow cutoff
D Gros
Display gross
Select to display the gross
D nt-G
Display net/gross
Select to display the net/gross
D Hi
Display high
Select to display the max
D HL
Display H&L
Select to display the max & min toggling
D Hold
Display hold
Display hold
D Lo
Display low
Select to display the min
D PCt
Display PCT
Select to display percent of PV1 (dual-scale
display)
D Pv
Display PV
Select to display PV
D Pv1
Display PV1
Select to display PV1 (dual-scale display)
D Pv2
Display PV2
Select to display PV2 (dual-scale display)
D r_u
Display r-u
Select to display reading and units
D unit
Display units
Select to display engineering units or label
Dec pt
Decimal point
Set decimal point
DeLAY
Delay
Enter relay Time Delay menu
Diag
Diagnostics
Display parameter settings
diamr
Diameter
Enter the tank’s diameter in inches
d-Inty
Display
intensity
Set display intensity level from 1 to 8
Dis 1
Display 1
Program display 1 value
Dis 2
Display 2
Program display 2 value (up to 32 points)
disabl
Disable
Disable function key
DLY 1
Delay 1
Enter relay 1 time delay setup (1-8)