Instruction Manual

DataView™ LI55 Level Controller Instruction Manual

46 | Page

Multi-Point Calibration & Scaling

The meter is set up at the factory for 2-point linear calibration. The

number of points for multi-point calibration/scaling is set up in the

Advanced Features menu. Up to 32 linearization points may be selected

for PV1 and up to 8 linearization points may be selected for PV2. See

page 81 for details.

Scaling the Meter (

SCALE)

The process input (4-20 mA, 10 VDC) can be scaled to display the

process variable in engineering units.

A signal source is not needed to scale the meter; simply program the

inputs and corresponding display values.

For instructions on how to program

numeric values see

Setting Numeric Values, page 28.

ENT E R

ENT E R ENTER ENTER

ENTER