Instruction Manual

DataView™ LI55 Level Controller Instruction Manual

41 | Page

Setting Up the Meter with the Full Menu (setup)

The Setup menu is used to select:

1. Input signal the meter will accept

2. Dual-scale feature for some level applications

3. Select the display units/tags

4. Decimal point position

5. Programming Menu

6. Display parameter and intensity

7. Relay operation

8. 4-20 mA analog output scaling

Press the Enter button to access any menu or press Up button to scroll

through choices. Press the Menu button to exit at any time.

Note:

Scal 1 & Scal 2 are

displayed instead o

Scale i

d-SCAL

selected under the

Setup Input menu.

They correspond to

the PV1 & PV2

scales.

Enter custom

units here

Note:

Use the

d-SCAL

selection

to activate the dual-scale

level feature - PV1 & PV2

(see introduction on page 6).

Set

d-SCAL

if both

displays are to be used fo

anything other than PV1 & PV2.

ENTE

RIGHT

ENTE

U P

ENTE

UP UP