Instruction Manual

DataView™ LI55 Level Controller Instruction Manual
32 | Page
Front Panel Buttons and Status LED Indicators
 Press the Menu button to enter or exit the Programming Mode at
any time.
 Press the Right button to move to the next digit during digit or
decimal point programming.
 Press or hold the Up button to scroll through the menus, decimal
point, or to increment the value of a digit.
 Press the Enter button to access a menu or to accept a setting.
Button
Symbol
Description LED Status
Menu
1-8 Alarm 1-8 indicator
Right
1-8
M
Flashing: Relay in
manual control mode
Up
T Flashing: Tare
Enter
1-8
Flashing: Relay
interlock switch open
Note:
F4 is a digital input. Alarms 5-8
are enabled when relay
expansion module is installed.
Note:
LEDs for relays in manual mode
flash with the “M” LED every 10
seconds. “M” flashing by itself
indicates Aout – manual control
is used.