Instruction Manual

RevA MN204260 5of16
GETTINGSTARTED StepFour
PodView® does not require any configuration.PodView® level indicator will automatically read the
configurationofthe attachedEchoPod®anddisplaythelevelperthesensor’sconfiguration.EchoPod® does
require configuration with the WebCal® software (especially if the relay are to be used).For a copy of
WebCal®,pleasegotohttp://www.flowline.com,clickonWebCal®Softwareandselectyourlanguageversion.
BeforeattachingPodView®totheEchoPod®,configuretheEchoPod®toWebCal®viatheLI99‐1001USB®Fob. 
OncetheEchoPod®isconfigured,removetheFobandattachthePodView®.
Note:Please refer to EchoPod® manual  for the wiring, configuration with
WebCal® and installation of
EchoPod®.

