User guide

LI25 Series Loop-Powered Meters Instruction Manual
*Access by holding Right/Reset for 3 seconds
Pushbutton Function
Menu Go to Programming Mode or leave Programming, Advanced
Features, and Max/Min Modes.
Right Arrow Move to next digit or decimal point position. Reset Total.
Up Arrow Move to next selection or increment digit. Go to Max/Min Mode.
Enter/Ack Accept selection/value and move to next selection. Toggle Rate/
Total.
Hold to Acknowledge Alarm.
Menu held for 5 seconds enters Advanced Features
Max/Min Mode
While in Run Mode, pressing Up Arrow will initiate Max/Min Mode. Up Arrow toggles
between Max & Min displays, and Right Arrow resets the Max/Min to the current
value. Press Menu or wait 10 seconds to return to Run Mode. Pressing Enter/Ack will
disable the 10 second timeout and continuously display Max or Min.
Press & hold Menu for 5
seconds to access Advanced
Features Menu
When a password is enabled,
parameter settings are locked, but
scale settings can be displayed by
selecting the program menu.
Program
Run
Max &
Min
Advanced
Features
Up Arrow
Menu
Menu
Menu
Menu
Operational Modes
Function
Filter
Bypass
Trend
Arrows
Initial
Calibrate
Information
Menu for 5
seconds
Linear
Square Root
Programmable
Exponent
Cutoff
On
Off
Software
Version
*Factory
Defaults
Contrast
38