User guide

LI25 Series Loop-Powered Meters Instruction Manual
Maximum & Minimum Readings (Max& MiN)
The maximum and minimum (peak & valley) readings reached by the
process are stored in the meter since the last reset or power-up. The
meter shows MIN or MAX to differentiate between run mode and max/min
display.
Press Up to Display and to
Toggle Between Max & Min
10 Sec Time Out
9.2846GPS
Run Mode
9.5320MAX
6.1391MIN
Press Enter to hold Max/Min
Press Right to Reset Max/Min
Press Menu to Exit Max/Min
1. Press Up arrow/Max button to display maximum reading since the
last reset/power-up.
2. Press Up arrow/Max again to display the minimum reading since
the last reset/power-up.
3. Press Enter/Ack to hold Max/Min display reading, the meter will
continue to track new Max/Min readings.
4. If Enter/Ack is not pressed, the Max/Min display reading will time
out after ten seconds and the meter will return to display the actual
reading.
5. Press Right arrow/Reset button to reset Max/Min while reading is
being displayed. Max/Min display readings are reset to actual
reading.
32