User guide

LI25 Series Loop-Powered Meters Instruction Manual

Setting Up the Meter (setup)

The Setup menu is used to select:

1. Decimal point position

2. Engineering units display

Press the Enter/Ack button to access any menu or press Up arrow

button to scroll through choices. Press the Menu button to exit at any

time.

setuP deC.Pt

units

Setting the Decimal Point (deC.pt)

Decimal point may be set with up to four decimal places or with no

decimal point at all.

Pressing the Right or Up arrow moves the decimal point one place to

the right until no decimal point is displayed, then it moves to the left

most position.

deC.pt

ddddd

Select Decimal

Point