User guide

LI25 Series Loop-Powered Meters Instruction Manual
Main Menu
The main menu consists of the most commonly used functions: Setup,
Program, and Password.
• Press Menu button to enter Programming Mode then press Up
arrow button to scroll main menu.
9.2846GPS setup prog pass
Run
Mode
• Press Menu, at any time, to exit and return to Run Mode. Changes
made to settings prior to pressing Enter/Ack are not saved.
• Changes to the settings are saved to memory only after pressing
Enter/Ack.
• The display moves to the next menu every time a setting is
accepted by pressing Enter/Ack.
Setting Numeric Values
The numeric values are set using the Right and Up arrow buttons.
Press Right arrow to select next digit and Up arrow to increment digit.
The digit being changed blinks.
Press the Enter/Ack button, at any time, to accept a setting or Menu
button to exit without saving changes.
04.000
04.000 05.000
Increment Digit
Value
Next
Setting
Select Next Digit Accept Setting
The decimal point is set using the Right or Up arrow button in the
Setup-decimal point menu.
16