Instructions / Assembly

Assembly Instructions for Cozy Chair Collection
- PO Box 595 Clio, MI 48420 - Oce: [phone] - Fax: [phone] - www.owerhouses.com -
Images are not to scale
Continue with other side and back base pieces.
(1)
(2)
(3)
(Optional) Insert wedges with interlocking teeth
facing each other in between outermost rib and
bolts for optimal appearance/tighness.
(4)
(5)
On the bottom center of the chair, start by threading outermost
bolts through rib into threaded holes on center front of base.
Then, place bolts through holes on outer edge of rib, through to
threaded hole on outer edge of base.
Begin assembly by attaching
the front piece of the base (no tab,
treaded holes on top) to a shorter
side piece (tabs facing in) by
screwing into threaded holes on inside.
*Top of chair*
*Top of chair*
(6)
Locate pre-made holes within the inner back side of chair and
insert U-bolt through and into tab on underside of seat.
Secure with nuts.
(7) Make sure all nuts are tightened and chair is securely attached
to base. Place down at cushion followed by leisure cushion,
put chair in at, level location, sit back and enjoy!
Open chair frame and insert bolts into
openings on inside of outermost rib,
fastening with bolts, on top pan of chair.
Lever tool included for ease of opening.