Installation Guide

Assembly Instructions for the following:

TearDrop, MoonDrop, UFO, Flying Saucer

Caution!

TAKE EXTREME CARE IN FINDING A STRONG, SAFE MOUNTING LOCATION

Step 1: Place your hanging chair flat on the

ground, spread the door open for access to

the belt loops where you will insert the

steel tubes

Step 2: Insert steel tubes one at a time

through the built in loops on the inside of

the hanging chair

Step 3: Feed all steel tubes individually into

each other one at a time until the ring is

complete

Step 4: Mount your hanging chair from a

safe, strong location and enjoy

Parts List:

(1) Storage bag

(1) Hanging chair

(1) Screw locking carabiner

(1) Rope – 26 feet or 8 meters

(8) Steel tubes

PAGE 1
Assembly Instructions for the following: TearDrop, MoonDrop, UFO, Flying Saucer Caution! TAKE EXTREME CARE IN FINDING A STRONG, SAFE MOUNTING LOCATION Parts List: (1) Storage bag (1) Hanging chair (1) Screw locking carabiner (1) Rope – 26 feet or 8 meters (8) Steel tubes Step 1: Place your hanging chair flat on the ground, spread the door open for access to the belt loops where you will insert the steel tubes Step 2: Insert steel tubes one at a time through the built in loops on the inside of the hanging
PAGE 2
SAFETY GUIDE IMPORTANT INFORMATION – Do not discard Caution! TAKE EXTREME CARE IN FINDING A STRONG, SAFE MOUNTING LOCATION Caution! Safety is most important! This is not a toy, it is made for rest, relaxation, reflection, and meditation. Take extreme care when setting up, mounting, and using your hanging chair. 1. Do not hang more than 24 inches off the ground. 2. Do not attempt to step or stand inside or on top the hanging chair 3. Do not ride or hang on the outside of the hanging chair. 4.