Instructions / Assembly

Assembly Instructions for Hanging Egg and Ball Chairs
1. Open the package
and unwrap the four
short legs and put
rubber feet on each of
the four legs (if not
already attached).
2. Connect the four
legs to the X-frame
on the lower bow of
the stand using the 4
shorter nuts and
bolts.
Attach upper bow to
lower bow with the
longest 2 nuts and
bolts.
3. Open egg chair frame
completely and put the
four smallest nuts and
bolts in place.
Make sure the flat tops
are on the inside of the
chair, so they do not
poke through the fabric
or through the seat.
4. Close the top and
bottom flaps by
clasping the hooks to
the eyelets.
5. Lift the chair and open
the seatbelt attachment
strap.
6. Slide the seatbelt
attachment strap into the
holding groove on the top of
the frame.
7. Place the bottom flat
cushion on the seat of the
chair then place the leisure
cushion on top.
8. Make sure all nuts and
bolts are tightened
throughout the stand and
chair. Place in any level
location and enjoy your
Hanging Chair!
Thank you for your
business!
PATENT:
www.flowerhouses.com/patents
*Specifications subject to change without notice
(optional)
Insert wedges with interlocking
teeth facing each other in between
outermost rib and bolts for optimal
appearance/tightness.
Before starting assembly, unpack entire contents of box and check that all parts are accounted for.
Contact FlowerHouse for any replacement or repair issues:
[phone] – [e-mail]