Instructions / Assembly

Table Of Contents

(4) Legs

(4) Rubber feet

(1) Lower Bow with feet connectors

(1) Upper Bow

(1) Main Chair C-Frame

(1) Bottom Flat Cushion

(1) Leisure Cushion

(1) Wrench

(2) Allen Wrench

(10) Nuts and Bolts

Parts and Assembly Instructions for

Hanging Egg and Ball Chairs

• PO Box 595 Clio, MI 48458

• Office: (810)-686-8252

• Fax: (810)-686-5492

Images are not to scale

PAGE 1
Parts and Assembly Instructions for Hanging Egg and Ball Chairs (4) Legs (4) Rubber feet (1) Lower Bow with feet connectors (1) Upper Bow (1) Main Chair C-Frame (1) Bottom Flat Cushion (1) Leisure Cushion (1) Wrench (2) Allen Wrench (10) Nuts and Bolts Images are not to scale • PO Box 595 Clio, MI 48458 • Office: (810)-686-8252 • Fax: (810)-686-5492
PAGE 2
Assembly Instructions for Hanging Egg and Ball Chairs Before starting assembly, unpack entire contents of box and check that all parts are accounted for. Contact FlowerHouse for any replacement or repair issues: (810)686-8252 – customerservice@flowerhouses.com 1. Open the package and unwrap the four short legs and put rubber feet on each of the four legs (if not already attached). 2. Connect the four legs to the X-frame on the lower bow of the stand using the 4 shorter nuts and bolts.
PAGE 3
How to use lever tool (used for assembly assistance) Before starting assembly, unpack entire contents of box and check that all parts are accounted for. Contact FlowerHouse for any replacement or repair issues: (810)686-8252 - customerservice@flowerhouses.com Place the peg of the curved end of lever on the inside middle of the pan, with the peg of the straight bar on the outside. Pull the straight bar towards the outer rib of the chair.