User Guide

Data Types & Signal Flow
Int/Float > Poly/Mono
A Float or Int can be connected to Poly or Mono inputs. These act like signals that maintain a constant level. You can't however connect a
Poly or Mono to a Float or Int. In fact Poly and Mono connectors can only be connected to themselves.
MIDI <> String
This is not so much a conversion as a handy way to check what MIDI data is coming from a MIDI output. Attach a String data component
and note on/off, control change and pitch bend messages etc. are shown together with the various parameters that define them.
As this isn’t a conversion as such you need to ‘force’ MIDI to String links by holding SHIFT + CTRL when linking.
79 of 212