User Guide

Modules
Focus Mode
If you're building an application to export sometimes you may want to preview it or even just use it without all the editing interface getting in
the way. You can do this using a feature called Focus Mode.
Focus Mode applies to a particular module. It collapses the application window around a module and allows you to have it as the main focus
– as if it was the application.
Focus on a Module
To put a module into Focus Mode, select the module then click the focus mode button on the action panel (looks like a magnifying glass).
Alternately right-click on the module and select Focus Mode.
To exit Focus Mode click the close button, press the ESCAPE key.
Focus on the previous Module
You may want to preview your application or module when you're in some other part of the schematic without having to navigate back to find
it each time. You can do this by selecting Focus Mode from the View menu or by right-clicking on an empty part of schematic and selecting
Focus Mode.
The last focused module will be selected in this case regardless of any other module that may be selected in the schematic at the time.
For quick switching Focus Mode in this way you can use the keyboard shortcut SHIFT + ESCAPE.
67 of 212