User Guide

Modules
Basic Operations
You can do everything to a module that you can do to a primitive. You can delete it, name it, move it around etc. The key difference between
a module and a component is that you can go into a module and view or edit it's schematic.
Moving into a Module
With most operations in FlowBotics
Studio there are many ways to do the
same thing. Moving into a module is
no exception.
To move into a module, either:
1. Click the Move into Module
button on the action panel
2. Double-click on the module
3. Right-click on the module and
select Move into Module from the
context menu
4. With the module selected, press
the PGUP key
The Schematic Window will change to show the module's own schematic, the Navigator will also change to reflect this.
To move back out of the module again, either right-click and select Move to Parent or press the PGDN key. You can also double-click on an
empty part of the schematic or of course use the Navigator.
47 of 212