User Guide

Components & Links
Multiple Selections
You can select multiple components at the same time. This is useful if you want to move a group of components but maintain their relative
spacing or if you want to delete a whole load of things in one go.
There are two ways to create a multiple selection. The first way is to hold down SHIFT and then click on each of the components in turn. If a
component is already selected, clicking on it will remove it from the selection.
A quicker way to make a multiple selection is to drag select. This involves dragging out a rectangle to enclose all the components that you
want to select.
To drag select:
1. Click on a blank part of the schematic to the top-left of the components you want to select.
2. Holding the mouse down, move the mouse down and to the right. You'll see a dotted rectangle appear as you move.
3. The components will show as selected as you move the mouse so when the selection is what you want release the button.
29 of 212