User Guide

Ruby Component
Inputs and Outputs
The Ruby component can interface with most other triggered data types in FlowBotics Studio. By default the component has one String input
and one String output.
Adding or Removing
To change the number of inputs and outputs just click and drag the handles under the bottom most connectors.
Changing Type
To change the type of a particular connector simply right-click on the connector and choose the type from the resulting menu. This is similar
to the way you can set the type for a Module Input or Output.
Inserting, Deleting and Moving
If you don't want to upset the configuration of connectors you already have then you can add or remove at a specific point.
These operations are performed by right-clicking on a connector. The right-click menu has a number of buttons at the bottom for deleting or
moving the connector you've click on or for adding a connector below it.
100 of 212
Drag handle down to add more
connectors or up to remove them
- adds a new connector below the one you clicked on
- deletes the connector you clicked on
- moves the connector up one place in order
- moves the connector down one place in order