Reference

Components
X10 Active Home
Description
The X10 Active Home component allows you to control and receive input data from a X10 home automation modules.
You must have an X10 computer interface connected to your PC.
X10 commands are sent as text. Simply connect a valid command string to the first input then trigger the Send input to send it.
An example X10 command string would be “sendplc A3 on”.
Data received from X10 modules like PIRs (passive infra red) are sent out through the “In” output.
Any errors that occur are sent through the Error output.
Connectors
Inputs Type Outputs Type
X10 command string
String Received strings from
other X10 modules
String
Trigger to send the
command
Trigger
Trigger when a
command has been
sent out
Trigger
Any X10 error
messages received
String
487 of 494