Reference

Components
Wireless Input
Description
The Wireless Input and Wireless Output primitives provide two ends of a wireless link. Wireless links provide a mechanism for passing data
through the module hierarchy without having to create any physical link.
The components have single Template input or output connectors. To change the type either right-click on the connector and choose a type
from the pop-up menu or create a link from the connector to another component and the template will pick up the type.
A connection is established between a Wireless Output and a Wireless Input only if the following three conditions are met:
1. The Wireless Input must appear in a module below the Wireless Output in the hierarchy
2. The Wireless Input and Output must have the same label
3. The Wireless Input and Output must have the same connector type
When a link is established the connection indicators on the Wireless Input and Output will light up.
Wireless links only work down the module hierarchy, you can’t link back upwards. Also, the range of a wireless output only extends as far as
the next wireless output below it which has the same label and connector type.
The same wireless output can connect to multiple wireless inputs and vice-versa so long as they conform to the 3 criteria described above.
Connectors
Inputs Type Outputs Type
N/A
N/A
Template connector which
must be set to the type you
want for the wireless link
Template
484 of 494