Reference

Components
parameter in your schematic that matches the name. If it fails to find a match the parameter data is ignored. This
means that if you have deleted something from your schematic the preset data will still load in correctly.
If your schematic contains new preset parameters not included in the file then these will not be affected. Having
loaded in your previous preset data you can then make adjustments to the new parameters and save out a new
file to reflect the schematic changes you have made.
One other point to note is that the preset loading will never create new programs. If your data file has more
programs than you have set in the Preset Manager in your schematic then the extra programs will be ignored. If
you want to use these programs just go to your schematic and increase the number of programs as required.
Properties
The Total box is where you define how many programs you require. New programs are automatically assigned program names. You can
cycle through the programs using the + and – buttons. Program names can then be changed in the Program box.
If you check the Lock box then the preset manager will only save changes when you press the save button (this includes changes to both
preset parameters via knobs/sliders and to program names). If you move from one program to the next without saving any changes will be
lost.
For the background you can set the outline style from the Line drop list. There are options for solid, dashed, dotted lines or you can choose
to have no outline at all. Line thickness is specified in grid squares. The Corner size is also specified in grid squares and determines how
rounded the corners are.
There are several background Fill options. You can have a solid, linear or radial gradient fills. You can also choose to have no fill colour. For
a solid fill only the Col1 colour applies. For the two gradient fills Col1 and Col2 define the boundary colours. For linear gradients you can also
specify the angle of the gradient.
350 of 494