Reference
Components
Preset Manager
Description
The Preset Manager component controls preset changes within a schematic.
The component stores the program names but the data is stored in Preset Parameter, Preset Parameter array and Preset String
components. The Preset Manager notifies these parameter components via its Preset output connector. Mostly this information is transferred
via use wireless links.
The Preset Manager also controls parameter updates. The Lock input determines whether changes to parameters are discarded between
program changes. The Save input can be triggered regardless of the lock state in order to save any changes made.
The Before and After Program Change trigger outputs are very useful if for delaying global calculations until after a program change has
occurred. If the calculations depend on several parameters then you can wait until all parameters have been updated as a result of the
program change before doing any calculations.
You must have one and only one preset manager per module if you want to have preset support. In the majority of cases the Preset Manager
module will be all you need.
346 of 494