Reference
Components
Phidgets RFID
Description
This primitive allows you to interface to the Phidgets RFID board.
Once you have the board connected to your PC you need to start the component by sending a trigger to the first input. The 'On' output will
return True if a connection has been established (False otherwise).
If you have multiple boards connected to your PC then you should provide the unique serial number of the board you want to connect to at
the 'Conn' (connection string) input. If you want to connect to a device on a remote server provide the device serial, IP and port or server
name and also a password if necessary separated by commas. Use -1 as the serial if you want to connect to the first device found.
Example connection strings:
“196491” or “635824,myserver” or “-1,myserver,password” or “142567,192.168.1.1,800,password”
The Ant input controls whether the RFID sensor is on or off. You can switch the on board LED on and off via the LED input.
The board has two digital outputs that you can control using the '0' and '1' inputs.
When an RFID tag passes close enough to the sensor it's id is sent to the TagId output. The Found output will change from false to true
when a tag is in close proximity.
319 of 494