Reference
Components
Phidgets LED 64
Description
This primitive allows you to interface to the Phidgets LED 64 board.
Once you have the board connected to your PC you need to start the component by sending a trigger to the first input. The 'On' output will
return True if a connection has been established (False otherwise).
If you have multiple boards connected to your PC then you should provide the unique serial number of the board you want to connect to at
the 'Conn' (connection string) input. If you want to connect to a device on a remote server provide the device serial, IP and port or server
name and also a password if necessary separated by commas. Use -1 as the serial if you want to connect to the first device found.
Example connection strings:
“196491” or “635824,myserver” or “-1,myserver,password” or “142567,192.168.1.1,800,password”
This is a very simple component to use. Simply specify the LED you want to control using the LED input. This should be a value from 0 to 63.
Then set the luminance using the Lum input. Luminance is in the range 0 to 100 with 0 being off and 100 being fully on.
The current luminance of the specified LED is also given at the Lum output.
315 of 494