Reference
Components
Phidgets Bridge
Description
This primitive allows you to control a Phidgets Bridge board.
Once you have the board connected to your PC you need to start the component by sending a trigger to the first input. The 'On' output will
return True if a connection has been established (False otherwise).
If you have multiple boards connected to your PC then you should provide the unique serial number of the board you want to connect to at
the 'Conn' (connection string) input. If you want to connect to a device on a remote server provide the device serial, IP and port or server
name and also a password if necessary separated by commas. Use -1 as the serial if you want to connect to the first device found.
Example connection strings:
“196491” or “635824,myserver” or “-1,myserver,password” or “142567,192.168.1.1,800,password”
The board has 4 analog inputs. You can enable and set the gain for each input independently. Gains must be either 1,8,16,32,64 or 128. If
you enter a value outside of this range it will be rounded to the nearest of these values. Higher gain gives you lower noise and higher
resolution.
305 of 494