Reference

Components
Netvox USB
Description
This component allows you to connect to a Netvox home automation USB adapter.
The adapter installs as a virtual COM port so you need to find out which port it's on before you can use this component.
Send the com port number to the 'Port' input (just the number, not the 'COM' part). You can set the Baud Rate or leave this unconnected to
use the default.
Trigger the Start input to connect. The 'On' output will send True if successful or False otherwise. If connected the Status output will show as
"Connected”. If no USB adapter can be found the status will show as “Device Not Found”.
Once you are connected to an adapter you can use the other Netvox components to connect to devices that are paired with the adapter.
272 of 494