Reference

Components
Netvox Mains Power Outlet
Description
This component allows you to connect to a Netvox mains power outlet device that is paired with a Netvox USB adapter attached to your PC.
IMPORTANT: you must first use a Netvox USB component and successfully connect to the USB adapter before attempting to connect to a
device.
Before starting the component you need to send the IEEE address of the device to the 'Id' input. The IEEE address is usually written on the
device itself.
Trigger the Start input to connect. The Status output will show as "Searching”. If the device can't be found the status will show as “Not
Found”. If the status shows “No Network” then the Netvox USB adapter has been disconnected.
On successful startup the device details will be updated. Battery level, On/Off status, Current, Voltage, Power and Energy usage will all be
sent to the relevant outputs.
You can request an update manually by sending a trigger to the 'Query' input.
To switch the mains outlet on or off you can send a boolean value to the 'On' input. Trigger the 'Toggle' input to flip the state of the outlet.
If the connection is lost at any time the status will change to “Lost Connection”. Reconnection will start automatically at which point the status
will change to “Reconnecting”.
Connectors
Inputs Type Outputs Type
IEEE address of the device
you want to connect to
String The current connection
status
String
Trigger to start the
component
Trigger The percentage
battery level (-1 means
if it could not be read)
Int
Trigger to query the
component
Trigger
Whether the outlet is
currently on
Boolean
268 of 494