Reference

Components
Module Wireless Output
Description
Most modules will have fixed output connectors that you physically link up to other connectors. However, it is sometimes useful to make a
module output wireless. Instead of using a Module Output component you use a Module Wireless Output component.
The component has a single Temple input connector. To change the type either right-click on the connector and choose a type from the pop-
up menu or create a link from the connector to another component and the template will pick up the type.
By adding wireless outputs to your module the module becomes a wireless module. The module will behave In the same way as a Wireless
Output component establishing wireless links with matching Wireless Input components lower down in the module hierarchy. As with
Wireless Outputs a match is determined by the type of connector and the component label.
Wireless modules can be identified by the wireless symbol which appears on the module body. This will appear grey when no links have
been established. However, if one or more Module Wireless Outputs within the module have established connections with matching Wireless
Inputs the wireless symbol will light up.
For more information on wireless links see the corresponding section in the Components and Links chapter (Chapter 3) of the main user
guide.
Connectors
Inputs Type Outputs Type
Template connector which
must be set to the type you
want for the wireless output
Template N/A
242 of 494