Reference

Components
Measurement Computing 1208FS
Description
This primitive allows you to send and receive data to and from the Measurement Computing Corp. 1208FS data acquisition board.
If you have multiple boards connected to your PC then you should provide the number of the board you want to connect to at the 'Board'
input. This number is assigned by Measurement Computing's InstaCal application so refer to that to get the board number if you need it.
The board has 16 digital I/O pins and 8 analog inputs. The digital I/O is split into two banks, A and B. Each bank can be configured as a set
of digital inputs or digital outputs.
The analog inputs can be configured as 8 single ended inputs or 4 differential inputs.
To set the I/O configuration you need to supply a string to the I/O input of the component. This should be a comma separated list of any
combination of the following:
SE - single ended analog inputs
D - differential analog inputs
AI - set bank A of digital I/O to be inputs
BI - set bank B of digital I/O to be inputs
202 of 494