Reference
Components
Connectors
Inputs Type Outputs Type
Trigger to start the
component
Trigger Whether the U3 is
connected and on
Boolean
Address of the board you
want to connect to (optional)
String The ambient
temperature of the
board
Float
Configuration string to set
the I/O
String
16 x outputs used for the
FIO and EIO pins that are
setup as inputs on the U3
Boolean / Float
Trigger to set the I/O
Trigger
4 x outputs used for the CIO
pins that are setup as inputs
on the U3
Boolean
The start pin for any timers
or counters
Int
Configuration string for
setting up any timers
String
Number of counters required
Int
Trigger to set up the timers
and counters
Trigger
Index of timer or counter you
want to reset (1=Timer1,
2=Timer2, 3=Counter1,
4=Counter2)
Set the value of DAC0
Float
Set the value of DAC1
Float
16 x inputs used for the FIO
and EIO pins that are setup
as outputs on the U3
Boolean
4 x inputs used for the CIO
pins that are setup as
outputs on the U3
Boolean
190 of 494