Specification

Installation | Installation
Step 3
Connect the hot and cold supply
lines onto the matching water
valves and secure the connection
with an adjustable wrech.
CAUTION: Risk of property
damage. Do not overtighten
connections. This will prevent
water leakage.
NOTICE: Use care to avoid cross
threading or overtightening the
connections. Unless otherwise
indicated, use an adjustable
wrench to tighten one-quarter
turn pst hand-tight.
Étape 3
Branchez les conduites
d’alimentation chaude et
froide sur les vannes d’eau
correspondantes et fixez la
connexion avec un wrech réglable.
ATTENTION: Risque de dommages
matériels. Ne serrez pas
excessivement les connexions. Cela
empêchera les fuites d’eau.
AVIS: Veillez à éviter les filetages
croisés ou un serrage excessif
des connexions. Sauf indication
contraire, utilisez une clé à molette
pour serrer le pst d’un quart de
tour à la main.
Attention
(avoid hose crimps)
Hot Supply Hose
Cold Supply Hose