Installation Guide

STEPS TO SET UP YOUR
FLOW SET TOP BOX
This easy step-by-step guide takes the guess work out of installation
and gets you on your way to a world of entertainment in no time.
WHAT ELSE YOU’LL FIND IN THIS BOX
Remote Control
HDMI Cable RCA/AV Cable
Power Cable Ethernet Cable
HOW TO INSTALL
THE SET TOP BOX
STEP 1
Connect one of end of the ethernet cable provided to the
available ethernet IPTV port at the back of your Optical
Network Terminal (ONT). (Port 2,3 or 4 only)
Connect the other end of the ethernet cable to the ethernet
port at the back of the Set Top Box.
STEP 2
HDMI Input: Connect the HDMI cable provided to the
available HDMI port on your television. Connect the other
end of the HDMI cable to the HDMI port at the back of the
FLOW Set Top Box.
3
2
1
OR
RCA/AV input: Connect the RCA/AV cable provided to
the RCA/AV ports on your television. Connect the other end
of the RCA/AV cable to the A/V Out port at the back of the
FLOW Set Top Box
STEP 3
Connect the power cable to the power cable port at the
back of the FLOW Set Top Box. Connect the other end of the
power cable to the electrical power source.
STEP 4
Ensure your television is on the corresponding source input
the FLOW Set Top Box is connected to on your television.
3
1
2
HOW TO INSTALL
THE SET TOP BOX