Operation Manual

Problem: The display shows error code E2.

Solution: The memory chip of the computer / display is damaged. Please contact your

dealer

Problem: The display shows error code E4 or is not registering the heart rate.

Solution: - In case your using the hand sensors in the handle bar make sure your hands

are clean and ﬁrmly hold the handle bar. Hand creme, movement or even

sweat can disturb the heart rate registration.

- In case your using a chest belt, make sure that:

a) The sensor is moist before applying to the skin.

b) The belt is worn tight enough.

c) The chest belt in not coded.

d) The battery is not empty.

Problem: The display shows error code E6.

Solution: The incline motor is damaged. Please contact your dealer.

Problem: The display shows error code E7

Solution: The incline motor is damaged. Please contact your dealer.

Problem: The display shows error code E9

Solution: The power cable is not properly connected.

- Check the connection between Power plug (11) and the Power wire (12).

- Check if the power cables have been damaged during the assembly of the

treadmill.

In case your problem is not resolved or not described, consult the ﬁtness dealer where you pur-

chased this product.

5. General information