Operation Manual

55
4.4 Maintenance
Centering and tensioning the treadmill
Within the first weeks of using the treadmill, it is possible that you need to
center the belt. For example this can happen when applying more pressure
to the left foot over your right.
Make sure the treadmill is running with a speed between 3 and 5 km / hrs.
At the back of the frame there are two adjustment screws. These screws
allows you to adjust the rear roller. When the treadmill is running to the left,
you need to turn the left adjusting screw clockwise on the and the right
adjustment screw counter clockwise. In the event that the treadmill is right,
you have to turn the left adjustment screw counter-clockwise and the right
adjustment screw clockwise. Make sure the belt stays well tensioned and
is not waving.
.
4. Use