Operation Manual

45
4. Use
Step 1: Assembling the supports posts.
This chapter describes how the treadmill needs to be assembled. Remove al parts from the
box and make sure there is enough working space available to assemble the treadmill. Due
to safety reasons and to prevent damaging the treadmill we advise you to assemble the
treadmill with two persons.
1. Place the Frame in an area where you can assemble the product.
2. Remove the Allen bolts (5) and self locking nuts (6) on the left and right side of the frame.
3. Put both support post left (3) and right (4) in an upright position (fig. 1).
4. Fasten both post with Allen bolt (5) and Allen bolt (6) (fig. 2).
4.1 Assembly
5
FIG.1
3
4
6
5
5
6
3
Fig.2
Fig.1