Operation Manual

38
2. Introduction
2.1 Contents of package
Thank you for purchasing the Flow Fitness Runner DTM600 treadmill. With the Runner
DTM600 treadmill you have purchased a high quality training machine.
With the Runner DTM600 treadmill you can have varied work outs due to the 9 different
training programs. The speed can be set from 0 to 16 km/h, the incline can vary between
0% and 12%. The heart rate can be measured by using the hand sensors or with a chest
belt (not included). This treadmill has a sturdy frame and a powerful engine, this ensures
smooth running comfort. Because the treadmill is so versatile and easy to use, it can be
used for your training needs.
In this instruction manual you will find all information necessary to use the treadmill.
Your also will find tips and advice on how to make the most of your training sessions.
We advise you to carefully read this instruction manual before using the Runner
DTM600 treadmill, so that you can use it safely and benefit from it maximally.
Flow Fitness wishes you successful and enjoyable training sessions.
1. Frame 15. Screws
2. Base frame 16. Support post housing (upper right)
3. Support post left 17. Support post housing (lower right)
4. Support post right 18. Screws
5. Allen bolt 19. Washers
6. Self locking nut 20. Allen bolt
7 A. Power plug 21. iPad holder
7 B. Power wire 22. iPad holder bracket
8. Handrail 23. Screws M5 x 10L
9. Console 24. Screws M4 x 8L
10. Screws
11. Water bottle holder
12. Safety key
13. Support post housing (upper left)
14. Support post housing (lower left)