Phau Ntawv Qhia

3
(
To control the cleaner by Bluetooth and clean the pool.
Operation Instructions:
1. Connect floating power cord.
2. Position the power supply so that it is approximately in the middle of the long side of
the pool at a distance of 3.5m /11.5ft. Fixation in the middle of longer side is recommended,
if you have a rectangle or oval shape pool.
3. Put the Pool Cleaner into the pool. Release the Pool Cleaner and let it sink to the floor of
the pool. Make sure that the floating cable is free of any obstructions.
4. Turn the power supply ON
(
230V AC 50Hz) in the position of l, One of the three modes
light will be on. Press the button for the mode you want to run, then press ON/OFF
button, the Pool Cleaner will now operate until it has reached the end of the cleaning
5