Instruction Manual ROBOTIC SWIMMING POOL CLEANER Type XR2 Read this instruction manual carefully before using your new robotic cleaner. Save for future reference.
Index 1. Product Introduction 2. Warning and Cautions 3.Features and Operation Instructions 4. Routine Maintenance 5. Trouble shooting 6. Speciļ¬cations 7.
Product Introduction Everybody wants to enjoy an easy life and automating the manual tasks involved with maintaining your pool is no exception. That is why we have developed the Flotide robotic swimming pool cleaner. . The Flotide robot acts as an underwater vacuum cleaner. , it is fully automatic. It is mainly used to clean the dirt and debris such as hair, leaves and sand from the pool floor; pool wall and waterline.
Warning: Always remember to turn the power supply off and unplug it from the power outlet before removing the cleaner from the pool. Warning: DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE. O Warning: Use this cleaner only when water temperature is 10-35 C and the depth of the pool is 0.5m-3m. The cleaner is designed to work for the pools with 100m 2 surface area. Warning: Keep the controller box in a dry place which is 3.5m away from your pool.
To control the cleaner by Bluetooth and clean the pool. Operation Instructions: 1. Connect floating power cord. 2. Position the power supply so that it is approximately in the middle of the long side of the pool at a distance of 3.5m /11.5ft. Fixation in the middle of longer side is recommended, if you have a rectangle or oval shape pool. 3. Put the Pool Cleaner into the pool. Release the Pool Cleaner and let it sink to the floor of the pool.
cycle. 5. Mode switching: Press on/off button, choose the mode, press on/off button to start the cleaner. 6. Indicator lights% LED Status Indication Light White On White Blinking twice White Always blinking Normal operation of the pool cleaner reverses after meeting obstacles Bluetooth communication with the pool cleaner or standby status Overload or no-load protection Let the cleaner sink to the floor of the pool, and Red On press on/off to start again.
Routine Maintenance 1.Clean the filter basket Turn off the Pool cleaner. Open the filter cover. Clean the filter basket with a hose. Insert the clean filter basket and close the filter cover. Make sure the power supply is switched off and unplugged. It is highly recommended to clean the filter basket after each cleaning cycle.
2. Use of filter paper core The filter paper core is a fragile part, which can filter particles below 100 m, and its service life is less than 72 hours. (The filter paper core can be used without affecting the performance of the robot, and it is strongly recommended that the filter paper core not be used in a dirty swimming pool. It is best to give final cleaning after majority of cleaning has been carried out) 3.
8 6
Trouble shooting Symptom Possible Reason Corrective action The pool cleaner moves but Clogged filter basket Clean the filter basket The pool cleaner does not An obstacle blocks the impeller Unplug the power supply. Open the move An obstacle blocks the drive belt impeller cover and check that nothing is does not clean the pool trapped in the impeller. Verify that nothing blocks the tracks or wheels.
Parts breakdown and replaceable Parts List 1. Controller box 8.Drive belt 2. Power cord for controller box 9.Driven wheel 3. Wheel brush 10.Sleeve 4. Main body 11.Wheel brush 5. Drive wheel 12.Filter basket 6. Drive wheel fixing block 13.Floating cable 7. Side panel 14.
